ETFE PARTICLE
ETFE, With Good Mechanical Properties, Weather Resistance, Flame Retardant, Gas Barrier And Chemical Resistance, Is One Of The Strongest Fluorine Plastics. In Addition To The Excellent Properties Of Other Fluorine Resins, It Also Has The Characteristics Of Radiation Resistance, Strong Adhesion To Metal Surfaces, And Lighter Than Other Fluorine Materials.
Model | Melt Index（g/10min） | Processing Method | Feature | Application |
SE805L | 0.1～5.0 | Molding | Melting Point 245 ~ 255℃ Granules | Mainly Used For Heat Shrink Pipe, Lining, Cable Insulation Layer, Etc. |
SE815L
| 5.1～15.0 | Molding, Injection Molding, Extrusion | Melting Point 245 ~ 255℃ Granules
| Mainly Used For Cable Insulation Layer, Pipe, Plate, Film And So On. |
SE815M | Melting Point 245 ~ 255℃ Film Grade Granule |
SE615L | Melting Point 220 ~ 230℃ Granule |
SE615M | Melting Point 220 ~ 230℃ Film Grade Granule |
SE825L
| 15.1～25.0 | Injection molding, Extrusion, Blow Molding | Melting Point 245 ~ 255℃ Granules
| Mainly Used For Cable Insulation Layer, Pipe, Plate, Film And So On. |
SE825M | Melting Point 245 ~ 255℃ Film Grade Granule |
SE625L | Melting Point 220 ~ 230℃ Granule |
SE625M | Melting Point 220 ~ 230℃ Film Grade Granule |
SE835L | 25.1～35.0 | Injection molding, Extrusion, Blow Molding | Melting Point 245 ~ 255℃ Granules | Mainly Used For Cable Insulation Layer, Pipe, Plate, Film And So On. |
SE635L
|
Melting point 220 ~ 230℃ granule
|
SE845L | 35.1～45.0 | Injection molding, Extrusion, Blow Molding | Melting Point 245 ~ 255℃ Granules | Mainly Used For Cable Insulation Layer, Pipe, Plate, Film And So On. |
Item | Unit | SE8 Series | SE6 Series |
Appearance | --- | Transparent Particles, Which Shall Not Contain Impurities Such As Metal Chips And Sand Particles, And The Percentage Of Particles Containing Visible Black Spots Shall Not Exceed 2%. |
Melting Point | ℃ | 245～255 | 220～230 |
Proportion | g/cm3 | 1.70～1.75 | 1.76～1.85 |
Rockwell Hardness | HB | 61～70 | 50～60 |
Tensile Strength (23 ℃) | Mpa | 30～50 | 28～45 |
Elongation At Break (23 ℃) | % | 300～450 | 300～450 |
Notch Impact Strength(23℃) | Ft-lb/in | No Break | No Break |
Water Absorption | % | ≤0.03 | ≤0.03 |
Oxygen Index | % | 30～40 | >50 |
Flame Retardant Rating | Level | V-0 | V-0 |
Dielectric Constant | / | ≤2.4 | ≤2.4 |
Dielectric Loss | / | 0.008 | 0.008 |
Breakdown Resistance Voltage（0.2mm） | KV | ≥7.5KV | ≥7.5KV |
Glass Transition Temperature | ℃ | 80～120 | 80～120 |
Usage Temperature | ℃ | -50～150 | -50～150 |
ATTENTION
PACKING
ETFE Pellet Products, Single Bag, 20KG/ Bag.
PRECAUTIONS
1. When Applying And Processing Products, Corresponding Labor Protection Supplies Should Be Worn To Eliminate Safety Hazards Such As Inhalation Of Toxic Gases And High Temperature Burns. Open Flames And Smoking Are Strictly Prohibited In The Workplace, And Corresponding Exhaust Devices Should Be Installed;
2. Products That Have Not Been Put Into Use After Opening Must Be Tightly Sealed To Prevent Foreign Matter From Being Mixed In;
3. Store The Product In a Cool And Ventilated Place, Away From Fire And Heat Sources;
4. During Transportation, Pay Attention To Sun Protection, Moisture Protection, Standing Upright, And Handling With Care;
5. Product Waste Must Be Disposed Of In Accordance With Relevant Laws And Regulations.
